Some problems are often encountered in the production and processing of webbing. Proper handling or avoidance in advance will make the webbing process simpler and more efficient. The problem that is often encountered is the formation of curved bands or waves. Let's discuss the reasons and preventive measures with you below.

Problem 1: The steel buckle is not uniformly worn; the wearing method of the steel buckle must be in accordance with the formal requirements. steel buckle to operate.
Problem 2: The pan head is not evenly drawn. The steel buckle is too large and the weft is too tight. You can choose a suitable steel buckle according to the width of the webbing. Pull off the larger and looser side and the silk-screen webbing until it is as flat as the other side or 1-5 less. Just circle.
Problem 3: The position of the steel buckle does not match. The steel button generally has a certain distance from the knitting needle and can be kept at a distance of the steel button. In order to avoid the wrong position, uneven yarn drawing on the pan head, tight on both sides, and too loose in the middle, you can exchange a few yarns in the middle and on both sides, or pull down the looser yarn in the middle.