China Imitation Cotton Webbing has a wide range of applications. The webbing processing equipment also requires a high degree of automation, and the effect is exquisite. The traditional webbing cutting is based on the principle of cold shearing and hot shearing. It is flat or yellowish or scorched. In order to improve this situation, the use of ultrasonic principle to cut the webbing can realize automatic cutting and ultrasonic sealing, without yellowing or scorching, to achieve the desired effect. The main equipment for webbing cutting includes: automatic webbing shearing machine, fully automatic webbing punching shearing machine, semi-automatic webbing shearing machine, all of which use the principle of ultrasonic to complete the cutting of China Imitation Cotton Webbing.

Two methods are usually used for cutting: one is manual cutting, and the other is machine cutting.

The handwork generally uses heating wire heating cutting or guillotine cutting method. These two cutting process equipment investment is low, but the labor cost is high. In addition, heating wire cutting will produce a lot of smoke; and there will be left on the cutting surface of the ribbon. Under burn marks.

The guillotine cuts the China Imitation Cotton Webbing, although there is no trace of smoke or burnt. However, if the sealing is not effective, the phenomenon of loose mouth (that is, fringing) will appear. Using automatic cutting machine for cutting: the cutting machine is divided into hot cutting machine, cold cutting machine and ultrasonic cutting machine.