1. The logo of Variable Webbing Pull should be clear, and should include product name, specification, color, length, manufacturer name, production date, etc. This allows for better discrimination when classifying.

2. The packaging method of Variable Webbing Pull should make the elastic band not dirty or loose. Dirty clothes are hard to sell, and Variable Webbing Pull is no exception.
3. It must be well packaged before transportation, and it should be anti-fouling, moisture-proof, high-temperature, fire-proof and rain-proof during transportation.
Fourth, the storage location should be adjusted well, and it should be anti-fouling, anti-high temperature, anti-mildew and moisture-proof during storage.
How to measure the size of Variable Webbing Pull:
1. Width detection: In the finished product to be inspected, the tape samples are randomly selected, so that the inspected part of the Variable Webbing Pull is placed flat in a natural state without tension, and the distance from the end is more than 2m. Use a ruler with an accuracy of 0.5mm to measure the Variable Webbing The width of Pull shall be measured once every 2m, at least three times, and the average value shall be taken.
2. Length detection: In the finished product to be inspected, the tape sample is randomly selected, so that the elastic band is in a natural state of no tension, and the length of the Variable Webbing Pull is measured with a measuring tool with an accuracy of 1mm.