In the process of producing variable webbing, some manufacturers will lead to insufficient product quality. Therefore, of course, there are still many things to pay attention to when we use it.

If these problems occur when using the production of variable webbing, the method we need to solve is to wear the steel buckle according to the conventional wearing method, one or two groups of wearing methods. In addition to this, another method can also be selected. For example, you can choose to pull off the larger, looser side until it's as flat as the other side, or 1-5 turns less. This is still the solution. For the staff, when using the variable webbing, it should be noted that the distance between the general steel buckle and the knitting needle should be kept at a certain distance from the steel buckle. And we also need to connect up and down or left and right according to the needs of the webbing. So if you encounter this kind of problem, there is still a way to solve it. I hope you can study hard and know what to do when you encounter this kind of problem in the future. In addition, there is a common problem when producing jacquard elastics. That is the wave. The cause of the formation is that the threading of the belt buckle is uneven, and there are too many yarns on both sides. Of course, the precautionary measure is to choose a standard steel buckle.