1: First determine the color light sources (indoor, outdoor and special light sources) required by customers
2: Pay attention to the materials (leather, cloth, ribbon, plastic, nylon, tedo, acrylic) of the High-Strength Webbing

3: Pay attention to the difference between double-layer and single-layer color matching. For transparent samples, the single-layer color matching will become lighter and darker, while the double-layer color matching will become darker. For example, the color matching will become darker when pasted on white paper
4: If the color of High-Strength Webbing can not be determined, it is best to put the correct sample in the middle, contrast sample on both sides, and keep in the same plane for color matching.
5: In color matching, sometimes the ribbon is pasted on the leather or cloth for color matching, and it will be placed on one side of the leather or cloth for color matching, which needs to be determined according to the customer's requirements
6: For the same color to do not specifications of High-Strength Webbing, you will find that different specifications of the ribbon color is not the same, this is mainly due to the impact of different specifications, especially the light color series, generally speaking, the thicker the ribbon, the denser the color will be
7: The High-Strength Webbing must be kept clean when it is colored. After the ribbon is polluted, the color light will change. For example, the color light will turn green after yellow pollution, and turn purple or peach after pink pollution