The manufacturer of Variable Webbing Pull tells you that during the processing of jacquard elastic belts, there are still many regulations and specifications for various fields, so what about the appearance inspection methods and appearance regulations for elastic belts? Appearance detection method:

1. The surface of the jacquard elastic belt should be flat, without broken edge glue, missing weft, lotus leaf sleeve, broken edge, oily dirt, poor edge, no obvious oily silk, broken warp, broken glue, jumping flower, loose gear, deformation and other safety hazards, the appearance should be consistent with the sealed sample.
2. The manufacturer of Variable Webbing Pull tells you that the color of the jacquard elastic belt should be compared with the color chart and the color code card. The color cast should be identified according to GB250, and it should not be less than 3-4 grades. The same batch of jacquard elastic bands should not have a color cast in the middle of each roll. Less than 3-4 grades.
Appearance regulations:
1. Inspection standard: The manufacturer of Variable Webbing Pull tells you that the appearance inspection of the jacquard elastic belt should be inspected by natural northern light in the room (the sun cannot shine on the product). If the light source is not enough, any normal fluorescent tube can be used to supplement the light intensity.
2. The appearance of elastic bands should meet the regulations by looking at them.
3. Use the method of sight and the gray card with five grades and nine grades to detect the color of the elastic band, which should meet the regulations.
4. The manufacturer of Variable Webbing Pull will tell you that the above defects are not broken defects (that is, rotten holes, rotten holes refer to three broken yarn jacquard tapes and above).